Skip to main content

GadgetKing.com

Home › This Viral 3D-Printed Energy Can Is a Clicker, Not Official Merch

This Viral 3D-Printed Energy Can Is a Clicker, Not Official Merch

Sponsored Spotlight

We have watched a lot of 3D-printed fidget clickers travel on Shorts this year: traffic lights, stuffed eggs, even a little PlayStation. The one tearing around YouTube this week is a tiny blue can with an orange claw on the side. It looks like a Juiced energy drink. It is not. It is a clicker.

The clip is from Print It Forge 3D, channel handle @Print_It_Forge_3D, and the title is “I 3D Printed MONSTER Energy JUICED Clicker.” That wording is the creator’s. It is a fan-made print, not official Monster Energy merchandise, and nothing in the Short says otherwise. The video ID is dfVoGQQ8Guk, it runs 9 seconds, and it went up on November 15, 2026. When we checked Trari’s channel page on the morning of November 19, 2026, in America/Chicago, the Short had 9,593,915 views, 26,067 likes, and 51 comments. Trari also had it as the No. 1 Tech Short on November 18, and listed the channel at about 140,000 subscribers.

If you only catch the last couple of seconds, it is easy to think someone shrank a real can. Slow it down and the print shows itself. The claw logo is a separate orange piece. In one shot, tweezers press that logo onto a plain blue body, which is about as clear a “this was made at a desk, not in a factory” moment as a 9-second Short can offer.

A hand holds a small blue 3D-printed can while tweezers press an orange claw-shaped logo onto the side
Tweezers, a printed shell, and a logo going on by hand. Still from Print It Forge 3D’s Short.

The lid is the toy. A gray tab sits on top of the can, and the click happens when you press that center button, the way you might fidget with a retractable pen. It is a satisfying little mechanism, and that is the whole joke: a drink can that does not open, does not pour, and exists to be clicked. The blue body and orange claw are a close visual nod to Monster’s Juiced Mango Loco can, which is why the Short traveled. It is still a model, not a licensed product.

A thumb presses the gray tab button on top of a small blue 3D-printed energy-can clicker with an orange claw logo
The move that sold the clip: press the tab, get a click. Still from Print It Forge 3D’s Short.

We could not confirm a shop listing or a file store from the creator for this specific print, and we are not going to dress up a random fidget or a beginner printer as “the one in the video.” LunarCrush’s archive of the Short’s description names a Bambu Lab P1S Combo and PLA filament, and calls the toy a fidget inspired by Monster Energy Juiced Mango Loco. We could not re-check that description directly on YouTube this morning, so treat the printer and filament details as coming from that archive, not from a fresh copy of the description field. Either way, this is a print-it-yourself object, not a can you buy at a gas station.

Two hands hold a small blue 3D-printed can clicker and press the gray button in the lid
Two hands, one button, no official merch tag. Still from Print It Forge 3D’s Short.

This is also not a one-off for the channel. Print It Forge 3D has been posting a steady run of tiny, clicky prints — a Coca-Cola can, a traffic-light remote, a stuffed egg, a PlayStation shell — and some of those have already gone well past a million views. The Juiced-style can is the one that sat at No. 1 on the Tech Shorts chart, but the formula is the same: a familiar object, a loud little mechanism, and a camera close enough to make the layer lines and the hand-placed logo obvious if you look. That familiarity is why it spread. It is also why the “not official merch” point is worth repeating. A logo you recognize is not a license.

There is no 3D-printing category on the site, and there is no verified in-stock product to point to, so this stays in the “look, don’t buy” pile. We searched for a straightforward fidget-clicker or beginner-printer tie-in and did not get a listing we were willing to stand behind, so we left the buy link out. If you already have a printer, you already know the drill: find the design from the creator, print it clean, and do not pretend it came out of a Monster factory. If you do not have a printer, the Short is still a nine-second master class in why fidget toys and brand-shaped prints blow up. Just remember what you are looking at. It is a fan-made clicker that happens to look like a drink.

Adam E

Written by

Adam E

Adam E. lives for the latest 3D printers, drones and anything that whirs. His new Tesla does the driving now, which frees up both hands for another print job.

More posts by Adam E →
Stay Updated — Get weekly gadget updates