The hook is simple, and it is why this clip will not leave the Shorts chart: a handmade silver ring taps a card terminal, the screen flips to “Cashless payment,” and a three-minute workshop video keeps rolling. Crafter Duck GARAGE titled the Short “I made a DIY payment ring from a credit card!” and posted it on November 3, 2026. When we checked on the morning of November 13, 2026, YouTube had it at more than 108 million views and about 1.66 million likes. ChartsList, in a snapshot updated at 4:15 a.m. ET the same day, still had it at No. 1 on its worldwide Shorts list, and at No. 1 in the United States, Australia, Canada, Germany, France, Hong Kong, Mexico, Nigeria, and the Philippines.
It is a “wait, that actually pays?” gadget video, and it is also a warning label. Do not try this with your only card.

The three-minute Short is a workshop montage, not a careful safety briefing. The creator cuts a contactless bank card down to the NFC chip and antenna, opens a square seat in a euro coin, and builds a silver signet-style ring around the electronics. In later shots the chip sits in the face of the ring like a tiny stone. Then a hand wearing the finished ring taps a terminal, and the screen reads “Cashless payment” for a cash-in amount of 19. We are describing what is already in the video, not handing out a project plan. A destroyed card, a soldered antenna, and a homemade wearable that talks to a payment terminal is a lot of ways to have a bad afternoon.

This is not a new idea, either. In 2019, David Sikes dissolved a contactless card in acetone, recovered the chip, and built it into a resin ring. Hackaday covered that project on April 25, 2019. The new Short is a flashier, jewelry-bench version of the same bet: that the chip in your card can live somewhere other than the card. The legal and practical catches have not gotten any smaller. Cutting up a bank card can violate the issuer’s terms. The bank may treat the original card as compromised or canceled. If the homemade antenna fails, you may have spent your only card on a ring that no longer pays. And a ring you cannot freeze as easily as an official wearable is a ring you can lose at a sink.

If the idea of paying with a wave of your hand is what you actually want, buy a ring that was designed for it. A tokenized payment ring lets you link a supported card in an app, freeze the wearable if it goes missing, and leave your bank card in one piece. When we checked on November 13, 2026, the official CNICK store had the Black Gen2 contactless payment ring in stock at 119 euros. CNICK partners with Fidesmo, uses tokenization, does not need charging, and lists the ring as waterproof. The company says it ships worldwide, with taxes included for EU and UK customers and customs left to the buyer everywhere else. Read the supported-card list for your country before you order. CNICK points to Curve as a fallback, and it also notes that Curve is available in the UK and the EEA, so U.S. shoppers should not assume a regular domestic debit card will just work. The Amazon U.S. CNICK and ASTARI payment-ring listings we checked the same day were out of stock, which is why the official store is the live checkout in this post.

Buy here for the official CNICK Black Gen2 payment ring. Recheck the live price, size chart, and supported cards for your country before you order.
If you just liked the coin-ring jewelry and you want to make ordinary rings out of coins — not bank cards — there is a tool kit for that. A USAReplacementparts coin-ring set with a 1/2-inch self-centering punch, a 17-degree folding cone, a dual-size reduction die, and a steel anvil was $89.99 and in stock on November 13, 2026, at 4.7 out of 5 stars from 6 ratings. It is a jewelry tool, sold for coins from about 17.8 mm to 30.6 mm. It is not a kit for extracting payment chips, and we are not going to pretend otherwise.
Buy here for the coin-ring tool set. Recheck the live price and stock before you order, and keep it away from the cards in your wallet.
Sources: Crafter Duck GARAGE’s Short (posted November 3, 2026; frames and view counts checked November 13, 2026), ChartsList (updated 4:15 a.m. ET, November 13, 2026), Hackaday on David Sikes’ 2019 ring, the CNICK Black Gen2 page (119 euros, in stock), and the Amazon listing for the USAReplacementparts coin-ring tool set ($89.99, in stock, 4.7/5 from 6 ratings, checked November 13, 2026). Images: frames from Crafter Duck GARAGE’s Short (01-04) and an official CNICK product photo (05).
More wearables and pocket gadgets: the Google Fitbit Edge, the Temple wearable forehead sensor and the Galaxy SmartTag3 tracker.
