It looks like a little instant camera. Boxy white body, gold lens ring, a red fake LED, even a card sliding out the front like a fresh print. Then you read the ring: LATTESHOT f/0.2, and underneath that, RELIEF 3D. No camera on earth shoots at f/0.2. This one does not shoot at all.
LatteShot is a 3D-printed gadget from the designer who goes by relief (@relief_3d). Load a stencil card, park the body over a fresh latte, press the shutter, and cinnamon sifts through the card onto the foam. The foam is the film. In a 40-second Short titled “3D-printed camera that prints on coffee,” relief walks through the joke and then the results. The Gadgeteer picked the clip up on November 11, 2026, and by then it had already passed 4.3 million views.

There is no motor, no battery, and no app to update. The shutter drives a lead screw, the screw walks a small brush across a printed mesh sieve, and the brush sweeps cinnamon through whatever stencil card is parked underneath. Relief’s own narration in the Short puts it simply: “This camera doesn’t take photos. It prints them on coffee. Inside, it’s just a screw and a little brush.”

The current Cults3D listing is LatteShot V3, last updated October 21, 2026. Relief says V3 brings a redesigned drive system, a stronger M3 connection, an optional locking lens, nine cup-centering rings, and adjustable button travel. The body is listed at 105 x 105 mm, with a print time of about 13 hours 30 minutes and around 360 grams of filament at a 0.16 mm layer height. The download includes a prepared 3MF project, 35 stencil cards, a user guide, and a full assembly video. You still need a few extra parts: one 608 2RS bearing, two to four small rubber bands, one M3x20 screw, and glue. Nothing physical ships. This is a file for a printer, not a camera in a box.
An earlier write-up at The Gadgeteer quoted smaller V1/V2-era figures — about 95 mm, 219 grams, and 11 and a half hours, with 27 cards. The live Cults page is the V3 set. If you already bought an older version, Relief says the V3 archive is a free update.
The Short is also honest about how deep the stencil library goes. The camera holds five cards in the top slot, like a pack of instant film. Relief started with cakes and quotes, then turned a portrait, a logo, and a QR code into cards. In the video, that QR code is sifted onto foam and actually scans. We watched the scan land on a phone camera pointed at the cup. The catch, if you want one, is that you need a printer, some calibration, and a steady foam surface — not a store shelf and a credit card.

We could not load a live Cults3D checkout price from this environment — the page is behind a Cloudflare challenge. A buyer on Relief’s Cults comments page said they paid 8.23 euros on November 6, 2026, and posted a PayPal receipt to that effect. Treat that as one recent receipt, not a guaranteed live price, and recheck the Cults listing before you buy. The listing has a 4.4 out of 5 creation-quality score from 32 votes. Relief also sells access and a commercial license tier on Patreon for anyone who wants to sell finished prints. The standard Cults download is for personal printing.
A few catches are worth reading before you start a 13-hour print. The user guide covers sieve calibration and powder choice for a reason. The mesh is sensitive to flow, first-layer squish, and line width, and some buyers have said their first prints did not match the promo video until they revisited those settings. Relief has also said the unfolding stencil album shown in the Short is not in the current download; it is planned as a separate model. A custom tool for turning your own photos into cards is likewise planned, not included. And because this is a 3D-printed sieve sitting over a drink, read the guide, use a food-safe workflow you are comfortable with, and do not treat a filament part like restaurant equipment.

Buy here for the official LatteShot V3 design files on Cults3D. Recheck the live price, then budget filament plus those few hardware-store parts.
If you do not have a printer, or you just want cinnamon stencils and foam tonight, these are ordinary coffee-bar tools, not a substitute for LatteShot itself. A SENHAI set with two stainless powder shakers and 16 latte stencils was $13.99 when we checked on November 12, 2026, at 4.4 out of 5 stars from 2,641 ratings. A Zulay Kitchen handheld milk frother wand — useful if your “film” is the foam — was $26.99, 4.4 out of 5 stars from 17,048 ratings, and listed as No. 1 in Amazon’s Milk Frothers category at the time of writing.
Buy here for the SENHAI shaker and stencil set, and buy here for the Zulay frother. Recheck the live prices before you order.
Sources: relief’s LatteShot Short, the Cults3D LatteShot V3 listing (specs as shown November 12, 2026), and The Gadgeteer (November 11, 2026). Images: a relief product still via The Gadgeteer (01, 05) and frames from relief’s Short (02-04).
More coffee and kitchen gadgets: the Bronson coffee machine that grinds, froths and cleans up, the viral $10 crepe machine and the cat robot that blows on your ramen.
